home *** CD-ROM | disk | FTP | other *** search
- Logging In On AMTOR
-
- This MBO has an automatic login procedure for registered stations
- with automatic answerback (AAB) enabled. When you first link with
- the system, it seizes the link, identifies, sends a 'WRU' character
- (figs-D), and waits for an answerback response. The expected
- response is:
-
- (CR/LF)QRA CALL SELCAL + ?
-
- or
-
- (CR/LF)DE CALL SELCAL + ?
-
- For example '(CR/LF)QRA WA8DRZ WDRZ + ?' IS TYPICAL RESPONSE.
-
- If no AAB response is received the system sends a manual login
- request followed by the + ? sequence. At this point a user should
- send either 'LOGIN (call)(CR/LF)' OR 'LOGON (call)(CR/LF)'. If the
- call has been registered the system will respond with a 'GA'
- prompt. If an error was received or the call is not registered the
- system will ask you to confirm the call. If you answer the
- confirmation request with 'YES' the call becomes registered.
-
- APLINK will disconnect after three minutes if no login has been
- recognized.
-
- Once you have logged on, the system is ready for your command
- whenever it sends a 'GA' (Go Ahead) prompt.
-
- You may log out of the system with 'LOGOUT(CR/LF)' or 'LOGOFF(CR/LF)'.
- any time the link is lost the current user is automatically
- logged out.
-
- If a message is being sent to the system during a link failure,
- that part of the message that was received is filed and is
- available to the addressee.
-
-